Polaris SCRAMBER 500 Manuel d'utilisateur télécharger pdf (Page 94)

MAINTENANCE

Spark Plugs

Spark Plug Recommendations

CAUTION

Using non-recommended spark plugs can result in serious engine

damage. Always use Polaris-recommended spark plugs. Refer

to the specifications section beginning on page 110

Refer to the specifications section beginning on page 110 for the

recommended spark plug type and gap for your vehicle. Torque spark

plugs to specification.

Plug Condition Torque Specification

New Spark Plug 9-11 ft. lbs. (12-15 Nm)

Previously Installed Spark Plug 17-20 ft. lbs. (23-27 Nm)

Spark Plug Insp ectio n

Spark plug condition i s indicative of engine operation. Check the spark

plug firing end condition after the engine has been warmed up and the

vehicle has been driven at higher speeds. Immediately check the spark

plug for correct color. S ee page 92.

WARNING

A hot exhaust system and engine can cause serious burns. Wear

protective gloves when removing a spark plug for inspection.

1. Remove the spark plug cap.

2. Using the special wrench provided in the tool pouch, rotate the

spark plug counterclockwise to remove it.

3. Reverse the procedure for spark plug i nstallation. Torque to

specification.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 128 129

Pas de commentaire

Polaris SCRAMBER 500 Manuel d'utilisateur Page 94