Polaris 2007 Victory Hammer Manuel d'utilisateur télécharger pdf (Page 107)

102

MAINTENANCE

Throttle

Check Throttle Control Grip and Cable

1. Rotate the t hrottle control grip. It should rotate smoothly from its

rest position to its completely open position and back again. It

should return to its rest position quickly when released.

2. Throttle freeplay - the amount of throttle control grip movement

from the rest position to the point of cable resistance - should be

1/8-1/4 inch (3-6 mm).

3. Adjust throttle freeplay if necessary.

Adjust Th rottle F reeplay

1. Slide the rubber covers off both cable adjusters, and loosen both

adjuster lock nuts.

2. Turn both cable adjusters into the cable as far as possible.

3. Turn the cable adjuster on the throttle opening cable (A) out until the throttle freeplay i s 1/8-1/4 in. (3-6 mm).

4. Hold the throttle control grip at the fully closed position and turn the cable adjuster on the throttle closing cable

out until resistance is felt.

5. Tighten the adjuster lock nuts on both cables, and reinstall both rubber covers.

6. Verify that the throttle grip moves smoothly throughout the full range of rotation and returns freely when

released.

1/8--1/4 inch

(3--6 mm)

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 166 167

Pas de commentaire

Polaris 2007 Victory Hammer Manuel d'utilisateur Page 107