Polaris Predator Manuel d'utilisateur télécharger pdf (Page 150)

147

ADJUSTMENTS

Chain Tension

Check the amount of chain slack by moving the vehicle slightly forward to remove slack at

the top side of the chain.

NOTE: The chain has a press-on master link. A chain tool must be used if it’s necessary

to remove the chain for service.

1. Collapse the suspension with an adjustable (buckle type) trailer tie down strap (A).

Fasten the s trap around the axle and rear bumper tube.

2. Tighten the strap until a straight line (B) can be drawn from the axle to the transmission

output shaft, intersecting the swing arm pivot. This establishes the tightest chain

position.

3. At this point (C) the chain should have 1/4″ -3/8″ (.6 -.9 cm) deflection. Use the

procedure on the following page if the chain needs adjustment.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 188 189

Pas de commentaire

Polaris Predator Manuel d'utilisateur Page 150