Polaris 2013 BRUTUS Owner's Manual Manuel d'utilisateur télécharger pdf (Page 75)

PTO SYSTEM

Removing And Installing PTO Shafts

(Models HD

PTO)

Description

If the utility vehicle will not be used for PTO driven attach-

ments for extended periods of time, it is possible to remove the

PTO drive shaft assembly from the PTO clutch. This will pre-

vent damage to the PTO system if the utility vehicle will be

used off road or if additional ground clearance is desired.

Removing:

1. Stop the engine. See page 41.

2. Make sure the PTO driveline and all rotating components

have come to a complete stop before exiting the utility

vehicle.

3. Install the utility vehicle on jack stands. See page 111.

4. Remove the four

bolts (Item 1) and

remove the shield

(Item 2).

Installation: Tighten

the bolts to 7 - 8 ft-lb

(9 - 10 Nm) torque.

5. Remove the

eight bolts (Item

3) and remove

the belly pan

(Item 4).

Installation: Tighten

the bolts to 7 - 8 ft-lb

(9 - 10 Nm) torque.

6. Remove the four

bolts and nuts

(Item 3) and

remove the guard

(Item 4).

Installation: Tighten

the bolts to 32 - 35 ft-

lb (43 - 47 Nm)

torque.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 141 142

Pas de commentaire

Polaris 2013 BRUTUS Owner's Manual Manuel d'utilisateur Page 75