Polaris SCRAMBER 500 Manuel d'utilisateur télécharger pdf (Page 74)

MAINTENANCE

Engine Oil

Oil and Filter Change

Oil Pump Priming

This priming procedure must be

performed whenever the oil hose

connection between the oil tank

and pump inlet has been

disconnected.

1. Clamp or pinch off the vent

line (1) approximately 2I

from the oil tank (2),

between the end of the oil

tank vent fitting and the vent

line’s pressure relief slit (3).

2. Run the engine for 10-20

seconds.

3. Remove the vent line clamp.

If the line is bled properly,

you should hear a rush of air,

indicating that the line is

properly primed and ready for

operation. If you do not hear

air, the line has not bled, and

you’ll need to repeat the

priming procedure.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 128 129

Pas de commentaire

Polaris SCRAMBER 500 Manuel d'utilisateur Page 74