Polaris SCRAMBER 500 Manuel d'utilisateur télécharger pdf (Page 88)

MAINTENANCE

Rear Drive Chain Slack

6. Roll the ATV forward or backward

to adjust the chain slack to the

proper tension. See the illustration

for proper splice link clip opening

position (1).

7. Tighten the eccentric locking bolts

to 30 ft. lbs. (41 Nm) for machines

without the hitch and 45 ft. lbs. (61

Nm) for machines with a hitch.

8. Tighten the caliper mount bolt to 15 ft. lbs. (20 Nm)

9. Remove the pin punch.

10. Roll the ATV forward, checking chain tension in several places

around the chain.

NOTE: The chain is adjusted correctly when the tightest portion of

the chain has approximately 3/8” (10mm) deflection.

11. P osition the chain guide to allow 1/8” (3mm) clearance and tighten

the retaining bolt to 5 ft. lbs. (7 Nm).

12. Reinstall the chain guard.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 128 129

Pas de commentaire

Polaris SCRAMBER 500 Manuel d'utilisateur Page 88