Polaris PHOENIX 200 Manuel d'utilisateur télécharger pdf (Page 86)

MAINTENANCE AND LUBRICATION

Adjustments

WARNING

Improper adjustment of the handlebars or incorrect torquing of

the adjuster block tightening bolts can cause limited steering or

loosening of the handlebars, resulting in loss of control and

possible serious personal injury or death. Follow the adjustment

procedures exactly, or see your Polaris dealer for service.

Handlebars

The handlebars can be adjusted for

rider preference.

1. Remove the handlebar cover.

2. Loosen (do not remove) the

four handlebar bolts.

3. Adjust the handlebar to the

desired height. Be sure the

handlebars do not contact the gas

tank or any other part of the

machine when turned fully to the

left or right.

4. Torque the front two bolts (1) to

10-12 ft. lbs. (14-17 Nm), then

torque the rear two bolts (2). A

gap of up to 1/8” (3 mm) will

remain at the rear bolts.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 110 111

Pas de commentaire

Polaris PHOENIX 200 Manuel d'utilisateur Page 86