Polaris 2013 WideTrak LX Manuel d'utilisateur télécharger pdf (Page 94)

MAINTENANCE

Track

Track Tension

f the track needs adjustment:

6. Loosen the rear idler shaft bolt.

7. Loosen the locknuts.

8. Tighten or loosen the track adjusting screws as necessary to provide

equal adjustment on both sides of the track.

9. Repeat the measurement on the other side of the track.

Tip: Check more frequently when snowmobile is new.

10. Start the engine and slowly rotate the track at least five revolutions.

Let the track come to a stop (do not apply brakes).

11. Check track alignment (see page 91) and adjust as necessary.

12. Tighten the locknuts.

13. Tighten the idler shaft bolts. Torque to 35 ft. lbs. (47.5 Nm).

Adjusting

Screw

Locknut

Slack Measurement

Track

10 lbs. (4.54 kg)

Idler

Shaft

Bolt

16 in. (40 cm)

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 130 131

Pas de commentaire

Polaris 2013 WideTrak LX Manuel d'utilisateur Page 94