Polaris 2007 Victory Hammer Manuel d'utilisateur télécharger pdf (Page 134)

129

MAINTENANCE

Sidestand

Sidestand Lubrication

1. Bring the motorcycle to a vertical position with an appropriate motorcycle lift or a block of wood or steel

placed securely under the frame.

2. Move the sidestand to its stored (up) position.

Wear face protection. The sidestand return spring is under tension and can injure your eyes and

face when released.

WARNING

3. Hold the nut and remove the sidestand pivot bolt and sidestand return spring.

4. Wipe any old grease and dirt from the sidestand, frame, and pivot bolt.

5. Lubricate the sidestand, the pivot bolt, and the ends of spring with VICTORY All Purpose Grease or equivalent.

6. Reinstall the sidestand spring and place the sidestand on the mounting boss, with the stand in the stored (up)

position.

7. Install the pivot bolt and tighten to specified torque while holding the nut.

Tor que: 35 ft-lbs (47 Nm)

8. Check to be sure the sidestand moves freely through its pivot range.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 166 167

Pas de commentaire

Polaris 2007 Victory Hammer Manuel d'utilisateur Page 134