Polaris 2003 MSX Manuel d'utilisateur télécharger pdf (Page 72)

OPERATION

Post Operation Maintenance

Temporary Storage

If the watercraft will be stored temporarily (less than

30 days), perform the daily maintenance procedures

beginning on page 68 and also perform the following

temporary storage procedures.

1. Block the seat (engine compartment) open about

1/2″ (1.3 cm) to provide air circulation and to

prevent condensation from forming.

2. If the seat is saturated with water, stand it on end

and allow it to dry out. When dry, store the seat on

the craft as outlined in step 1.

3. When storing the watercraft, make sure the nose is

positioned upward at a 20_ angle for drainage.

4. Check the screen in the pump stationary nozzle for

plugging. See instructions on page 90.

WARNING

Serious injury and damage to the watercraft will

result if the jet pump and impeller are cleaned while

the engine is running. Always stop the engine,

remove the lanyard lock plate and disconnect the

battery before servicing the jet pump and impeller.

CAUTION

Operation of the engine with the intake system

removed could result in serious engine damage.

Never operate the engine with the intake system

removed.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 113 114

Pas de commentaire

Polaris 2003 MSX Manuel d'utilisateur Page 72