Polaris 2012 WideTrak LX INTL Manuel d'utilisateur télécharger pdf (Page 39)

THE PERFECT FIT

Handlebar Adjustments

Standard Handlebar

Follow these steps to adjust handlebar angle at the handlebar block.

1. Remove the mountain bar by

removing nuts.

2. Using a 7/16-inch wrench,

loosen the four nuts on the

bottom of the adjuster block

(turn the handlebar either left

or right for access to the rear

nuts). If necessary, pry the

blocks apart with a screw-

driver.

3. Adjust the handlebar to the

desired angle. Be sure the

handlebar, brake lever and

throttle lever operate

smoothly and do not hit the

gas tank, windshield or any

other part of the snowmobile

when the handlebar is turned

fully to the left or right.

4. Torque the front bolts first, then torque the rear bolts. Torque the

bolts to 11-13 ft. lbs. (15-18 Nm).

5. Reinstall the mountain bar.

Bar

Nuts

Bolts

Nuts

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 127 128

Pas de commentaire

Polaris 2012 WideTrak LX INTL Manuel d'utilisateur Page 39