Polaris 2012 WideTrak LX INTL Manuel d'utilisateur télécharger pdf (Page 83)

MAINTENANCE

Lights

Avoid touching a halogen bulb with bare fingers. Oil from skin leaves a

residue, causing a hot spot that will shorten the life of the lamp. If fin-

gers do touch the bulb, clean it with an alcohol-moistened towel.

Headlight Bulb Replacement

1. Pinch the ends of the spring (1)

together and lift until it releases

from the spring retainer.

2. Lift the spring carefully around

the wire harness (2) and flip it to

the outside of the housing.

3. With the wire harness attached

to the bulb (3), withdraw the

bulb from the housing.

4. Grasp the bulb by its metal base

and carefully separate the bulb from the harness.

5. Hold the new bulb by its metal base and install it into the wire har-

ness.

6. Insert the bulb into the housing. Carefully flip the spring back into

the housing, placing it around the wire harness.

7. Squeeze the spring together until it's over the spring retainer and

release.

8. Verify headlight aim. See page 78.

Taillight/Brakelight Replacement

1. Remove the screws (1) securing the

taillight housing (2).

2. Remove and replace the bulb (3).

3. Reassemble all components.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 127 128

Pas de commentaire

Polaris 2012 WideTrak LX INTL Manuel d'utilisateur Page 83