Polaris 2012 WideTrak LX INTL Manuel d'utilisateur télécharger pdf (Page 70)

MAINTENANCE

Lubrication

Jackshaft Bearing

The jackshaft bearing on your model may be equipped with a grease fit-

ting, but this component is greased for life at the factory. Additional

lubrication is not required.

Driveshaft Bearing

Inject grease into the fitting on the

speedometer drive adaptor until

grease purges from inside or outside

the bearing seal (approximately two

pumps).

Throttle Cable

Lubricate the throttle cable lightly

with grease or oil. With the engine

off, turn the handlebars to the left

and lubricate liberally as shown.

Choke and Cable

Lubricate the choke slide and cables

lightly with oil or grease. Before

turning the engine off, operate the

choke intermittently to draw mois-

ture out of the choke plunger area

and reduce the possibility of the

choke becoming frozen.

Coupler Greasing

Grease the couplers on the drive-

shaft and jackshaft.



1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 127 128

Pas de commentaire

Polaris 2012 WideTrak LX INTL Manuel d'utilisateur Page 70